Antioxidant capacity,radical scavenger activity,lipid oxidation protection analysis and antimicrobial activity of red grape extracts from different varieties cultivated in Portugal

The aim of this study was to investigate the antioxidant capacity, radical scavenger activity, lipid oxidation protection and antimicrobial activity of grape extracts from 12 different red grape varieties cultivated in Portugal. The mean values of total phenolic content quantified in grape extracts varied from 833.7 to 2005.6 mg/L gallic acid. Antioxidant capacity results showed different values for each grape variety ranging from 3.96 to 32.96 mm/L Fe(II). The scavenger activity values ranged from 15.99% to 54.82% for the superoxide radical and from 11.79% to 29.67% for the hydroxyl radical. The grape extracts with the highest antioxidant capacity had a positive effect on the lipid oxidation protection and induced low peroxide values in butter samples. Finally, concerning antimicrobial activity, grape extracts from Touriga Nacional and Tinta Roriz grape varieties had significant antimicrobial activity, especially notable for total mesophilic aerobics.     

Tuning CO2 Uptake and Reversible Iodine Adsorption in Two Isoreticular MOFs through Ligand Functionalization

The synthesis and characterization of two isoreticular metal–organic frameworks (MOFs), {[Cd(bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 1 ) and {[Cd(2‐NH₂bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 2 ) [bdc=benzene dicarboxylic acid; 2‐NH₂bdc=2‐amino benzene dicarboxylic acid; 4‐bpmh=N,N‐bis‐pyridin‐4‐ylmethylene‐hydrazine], are reported. Both compounds possess similar two‐fold interpenetrated 3D frameworks bridged by dicarboxylates and a 4‐bpmh linker. The 2D Cd‐dicarboxylate layers are extended along the a‐axis to form distorted square grids which are further pillared by 4‐bpmh linkers to result in a 3D pillared‐bilayer interpenetrated framework. Gas adsorption studies demonstrate that the amino‐functionalized MOF 2 shows high selectivity for CO₂ (8.4 wt % 273 K and 7.0 wt % 298 K) over CH₄, and the uptake amounts are almost double that of non‐functional MOF 1 . Iodine (I₂) adsorption studies reveal that amino‐functionalized MOF 2 exhibits a faster I₂ adsorption rate and controlled delivery of I₂ over the non‐functionalized homolog 1 .     

Nitrite Oxidation with Copper–Cobalt Nanoparticles on Carbon Nanotubes Doped Conducting Polymer PEDOT Composite

Copper–cobalt bimetal nanoparticles (Cu?Co) have been electrochemically prepared on glassy carbon electrodes (GCEs), which were electrodeposited with conducting polymer nanocomposites of poly(3,4‐ethylenedioxythiophene) (PEDOT) doped with carbon nanotubes (CNTs). Owing to their good conductivity, high mechanical strength, and large surface area, the PEDOT/CNTs composites offered excellent substrates for the electrochemical deposition of Cu?Co nanoparticles. As a result of their nanostructure and the synergic effect between Cu and Co, the Cu?Co/PEDOT/CNTs composites exhibited significantly enhanced catalytic activity towards the electrochemical oxidation of nitrite. Under optimized conditions, the nanocomposite‐modified electrodes had a fast response time within 2 s and a linear range from 0.5 to 430 μm for the detection of nitrite, with a detection limit of 60 nm . Moreover, the Cu?Co/PEDOT/CNTs composites were highly stable, and the prepared nitrite sensors could retain more than 96 % of their initial response after 30 days.     

Chemoselective Oxidation of Benzyl,Amino, and Propargyl Alcohols to Aldehydes and Ketones under Mild Reaction Conditions

Catalytic oxidation reactions often suffer from drawbacks such as low yields and poor selectivity. Particularly, selective oxidation of alcohols becomes more difficult when a compound contains more than one oxidizable functional group. In order to deliver a methodology that addresses these issues, herein we report an efficient, aerobic, chemoselective and simplified approach to oxidize a broad range of benzyl and propargyl alcohols containing diverse functional groups to their corresponding aldehydes and ketones in excellent yields under mild reaction conditions. Optimal yields were obtained at room temperature using 1 mmol substrate, 10 mol % copper(I) iodide, 10 mol % 4-dimethylaminopyridine (DMAP), and 1 mol % 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) in acetonitrile, under an oxygen balloon. The catalytic system can be applied even when sensitive and oxidizable groups such as alkynes, amines, and phenols are present; starting materials and products containing such groups were found to be stable under the developed conditions.     

HIPE Polymerization Materials Functionalized with Iodic‐BODIPY on the Surface as Porous Heterogeneous Visible‐Light Photocatalysts

A high internal phase emulsion polymerization (PolyHIPE) material, with iodine‐functionalized boron‐dipyrromethene (iodic‐BODIPY) immobilized on its surface, composes a porous heterogeneous organic photocatalyst (iodic‐BODIPY‐PolyHIPE). It shows high catalytic efficiency on the selective oxidation reaction of aromatic sulfides under visible light. The substrates were almost fully converted to their corresponding sulfoxides and no sulfones were observed. Most importantly, iodic‐BODIPY‐PolyHIPE shows >1.6‐fold reaction rate compared to the previous non‐inorganic heterogeneous photocatalysts.     

可见光催化需氧氧化在有机合成中的应用

可见光催化作为一种新兴且强大的有机合成手段,具有洁净节能、优秀的官能团兼容性和良好的化学选择性等特征。氧气作为一种廉价、无污染的氧化剂,与可见光催化相结合,极大地促进了绿色化学的发展。本文主要对我们课题组近年来在可见光需氧氧化领域取得的成果做了简明的综述,并对其发展进行了展望。     

The Quest for Mononuclear Gold(II) and Its Potential Role in Photocatalysis and Drug Action

The chemistry of gold strongly focuses on the ubiquitous oxidation states +I and +III. The intermediate oxidation state +II is generally avoided in mononuclear gold species. In recent years, gold(II) has been increasingly suggested as a key intermediate in artificial photosynthesis systems, with gold(III) moieties acting as electron acceptors, as well as in gold‐catalyzed photoredox catalysis and radical chemistry. This Minireview provides a concise summary of confirmed and characterized mononuclear open‐shell gold(II) complexes. Recent findings on structural motifs and reactivity patterns will be discussed. Exciting developments in the fields of photosynthesis, photocatalysis, and potential roles in medicinal chemistry will be outlined.     

Preparation of magnetic molecularly imprinted polymer nanoparticles by surface imprinting by a sol–gel process for the selective and rapid removal of di‐(2‐ethylhexyl) phthalate from aqueous solution

Magnetic molecularly imprinted polymer nanoparticles for di‐(2‐ethylhexyl) phthalate were synthesized by surface imprinting technology with a sol–gel process and used for the selective and rapid adsorption and removal of di‐(2‐ethylhexyl) phthalate from aqueous solution. The prepared magnetic molecularly imprinted polymer nanoparticles were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and vibrating sample magnetometry. The adsorption of di‐(2‐ethylhexyl) phthalate onto the magnetic molecularly imprinted polymer was spontaneous and endothermic. The adsorption equilibrium was achieved within 1 h, the maximum adsorption capacity was 30.7 mg/g, and the adsorption process could be well described by Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer displayed a good adsorption selectivity for di‐(2‐ethylhexyl) phthalate with respect to dibutyl phthalate and di‐n‐octyl phthalate. The reusability of magnetic molecularly imprinted polymer was demonstrated for at least eight repeated cycles without significant loss in adsorption capacity. The adsorption efficiencies of the magnetic molecularly imprinted polymer toward di‐(2‐ethylhexyl) phthalate in real water samples were in the range of 98–100%. These results indicated that the prepared adsorbent could be used as an efficient and cost‐effective material for the removal of di‐(2‐ethylhexyl) phthalate from environmental water samples.     

Catalytic Performance of Graphite Oxide Supported Au Nanoparticles in Aerobic Oxidation of Benzyl Alcohol: Support Effect

Various Au/GO catalysts were prepared by depositing Au nanoparticles on thermally- and chemically-treated graphite oxide (GO) supports using a sol-immobilization method. The surface chemistry and structure of GO supports were characterized by a series of analytical techniques including X-ray photoelectron spectroscopy, temperature-programmed desorption and Raman spectroscopy. The results show that thermal and chemical treatments have large influence on the presence of surface oxygenated groups and the crystalline structure of GO supports. A strong support effect was observed on the catalytic activity of Au/GO catalysts in the liquid phase aerobic oxidation of benzyl alcohol. Compared to the amount and the type of surface oxygen functional groups, the ordered structure of GO supports may play a more important role in determining the catalytic performance of Au/GO catalysts.     

CoFe2O4/CuO活化过氧乙酸高效降解磺胺甲恶唑(英文)

利用化学沉淀法和溶胶凝胶法,通过两步法成功制备出含有尖晶石钴铁氧体和氧化铜的复合催化剂CoFe₂O₄/CuO,通过扫描电子显微镜(SEM)、X射线光电子能谱(XPS)和X射线衍射(XRD)对制备出的CoFe₂O₄/CuO进行表征,探究不同高级氧化体系对磺胺甲恶唑(SMX)去除能力,考察过氧乙酸(PAA)浓度、催化剂投加量、水体中常见干扰物质(Cl^-,HCO-3,SO₄^2-,HA)和不同自由基捕获剂对SMX去除的影响。分析结果表明CoFe₂O₄/CuO同时具有CoFe₂O₄与CuO的特征,对比单独CoFe₂O₄与CuO,CoFe₂O₄/CuO对PAA展现出极高的活化性能,在最佳反应条件下(催化剂投加量=20mg·L^-1,c(PAA)=200μ...